Product Overview
This heat-seal-type (thermoplastic) functional conductive film enables impedance control of flexible flat cables (FFCs). When laminated to both sides of an FFC, it is designed to achieve the 100 Ω differential impedance required for LVDS transmission lines. Its thin and lightweight design also preserves the inherent flexibility of the FFC.
Features
-
100Ω differential impedance
The mesh structure of the conductor enables a differential impedance of 100Ω suitable for LVDS transmission. -
Thin, lightweight, and flexible
The films feature a thin and lightweight design with excellent flexibility. -
Low-temperature, short-time bonding
The thermoplastic conductive adhesive enables easy bonding to a variety of substrates.
Main specifications
| Item | SF-FC334-MS | |
|---|---|---|
| Product thickness (after pressing) | 32 µm | |
| Structure thickness (after pressing) | Base film thickness | 12 µm |
| Shielding layer thickness | 0.1 µm | |
| Mesh pitch | 3.0 mm | |
| Mesh line width | 0.3 mm | |
| Anisotropic conductive adhesive layer thickness | 20 µm | |
| Separator film thickness | 40 µm | |
| Adhesion strength | Adherend: PET | 3.0 N/cm or more |
| Shelf life (at room temperature) | 6 months | |
Examples of Use
-
TVs
-
Office equipment (printers)
Reference data
-
Characteristic impedance
-
Characteristic impedance
* All data and numerical values shown above are measured values and are not guaranteed values.
